1986.5 7mge -> 2jzge my very first build.

1986.5supra_kid

Rice? No its Corn (E85)
Authorized Seller
Joined
May 7, 2010
Messages
976
Likes
1
Location
Anderson, South Carolina, United States
#43
Supra Parts Wish List Price (new)

1JZ Single MK3 IC Kit 4''-----------------------------$440.00
30-2130-50 aem map sensor kit-------------------- $145.00
AEM 30-6101 aem ems v2 2jzge-------------------$1,595.00
30-2400 aem boost control selenoid----------------$85.00
30-2010 aem iat sensor kit---------------------------$50.00
AEM 30-4900 wideband failsafe---------------------$218.00
WG 50mm HKS-----------------------------------------$95.00
1JZ Single Turbo Downpipe Kit----------------------$135.00
Oil Line Kit 1JZ/2JZ Single Turbo-------------------$175.00
Walbro F90000262 400lph---------------------------$158.00
1JZ/2JZ MK3 Damp Bypass-12mm------------------$65.00
Aeromotive AFPR Kit 2jz-----------------------------$250.00
turbo timer (brand?)-------------------------------------?
3'' exhaust system (brand?) --------------------------?
oil catch can ----------------------------------------------?
power steering cooler (aftermarket 3/8'')--------------?
 

1986.5supra_kid

Rice? No its Corn (E85)
Authorized Seller
Joined
May 7, 2010
Messages
976
Likes
1
Location
Anderson, South Carolina, United States
#44
here is some fancy parts im looking to get for my baby.

Supra Parts Wish List Price (new)

1JZ Single MK3 IC Kit 4''-----------------------------$440.00
30-2130-50 aem map sensor kit-------------------- $145.00
AEM 30-6101 aem ems v2 2jzge-------------------$1,595.00
30-2400 aem boost control selenoid----------------$85.00
30-2010 aem iat sensor kit---------------------------$50.00
AEM 30-4900 wideband failsafe---------------------$218.00
WG 50mm HKS-----------------------------------------$95.00
1JZ Single Turbo Downpipe Kit----------------------$135.00
Oil Line Kit 1JZ/2JZ Single Turbo-------------------$175.00
Walbro F90000262 400lph---------------------------$158.00
1JZ/2JZ MK3 Damp Bypass-12mm------------------$65.00
Aeromotive AFPR Kit 2jz-----------------------------$250.00
turbo timer (brand?)-------------------------------------?
3'' exhaust system (brand?) --------------------------?
oil catch can ----------------------------------------------?
power steering cooler (aftermarket 3/8'')--------------?
 

1986.5supra_kid

Rice? No its Corn (E85)
Authorized Seller
Joined
May 7, 2010
Messages
976
Likes
1
Location
Anderson, South Carolina, United States
#48
Well I ordered all those fancy parts from driftmotion. I have to say there grade A folks in my book. So I've got the intake off and the exhaust off too. The Turbo manifold is on the the t4-t3 adapter is on and I won't to bolt the Turbo on nut the compressor housing outlet is really close to the manifold and the frame so Idk what to do now. Ill post pictures Wed when Iget my laptop back. Also I'm not sure where to put the aem coolant sensor at either? Head radiator or somewhere on the thermostat housing?
 

1986.5supra_kid

Rice? No its Corn (E85)
Authorized Seller
Joined
May 7, 2010
Messages
976
Likes
1
Location
Anderson, South Carolina, United States
#52
in the 3rd picture is a problem-vband out is smaller than the vband to the down pipe :( add said it was 3'' but its not.
and the last picture ive encountered the problem of being inexperienced- made the turbo drain line before putting the compressor housing on..
 

1986.5supra_kid

Rice? No its Corn (E85)
Authorized Seller
Joined
May 7, 2010
Messages
976
Likes
1
Location
Anderson, South Carolina, United States
#53
in the 3rd picture is a problem-vband out is smaller than the vband to the down pipe :( add said it was 3'' but its not.
and the last picture ive encountered the problem of being inexperienced- made the turbo drain line before putting the compressor housing on..
 

1986.5supra_kid

Rice? No its Corn (E85)
Authorized Seller
Joined
May 7, 2010
Messages
976
Likes
1
Location
Anderson, South Carolina, United States
#54
PART_1352052227384.jpg and here is the problem the compressor outlet is between a hotspot and a hard spot. and the drain line was made to short. ugh im gonna put the intercooler stuff on now and hope i can turn the outlet up and clear the hood and have piping to reach.

btw anyone notice that the dizzy cap changed shape in that picture? :p
 

1986.5supra_kid

Rice? No its Corn (E85)
Authorized Seller
Joined
May 7, 2010
Messages
976
Likes
1
Location
Anderson, South Carolina, United States
#55
FFIM installed... damn it was a fight. had to make some room between it and the brake booster.. ran coolant lines to the Q45 TB and put the camry throttle cable in. it seems a little long but with a braket i could get it to work. i need to get the intercooler and piping in today tho.
 

1986.5supra_kid

Rice? No its Corn (E85)
Authorized Seller
Joined
May 7, 2010
Messages
976
Likes
1
Location
Anderson, South Carolina, United States
#56
got the intercooler in... damn its way to big. i dont know how low it can safely be but its flush with the bottom of the bumper. :/ my dad came over and critisized my work and some of it had truth in it like my intake having 1/16th clearance between it and my brake booster. so i will take it and the IC pipe for the BOV to be cut and rewelded. apparently the BOV on this kit from driftmotion puts it on the side where the battery is so if you want to keep your battery its gonna need cut flipped and welded. also looks like im short of IC pipes to get to the turbo...
 

1986.5supra_kid

Rice? No its Corn (E85)
Authorized Seller
Joined
May 7, 2010
Messages
976
Likes
1
Location
Anderson, South Carolina, United States
#58
turbo is kissing the exhaust manifold. i dont know how strong the silicone couplers are but i dont think they can handle being pressed up against the exhaust manifold.... idk what to do about that there is no room there. the holset must need some work.
 

dok33

My fuel pump precedes me
Authorized Seller
Joined
Apr 16, 2005
Messages
934
Likes
0
Location
Austin, TX
#59
Nice build!

Manifold clearance issues are pretty common and the coupler will definitely not hold up, I melted one with ~1" between the turbo and manifold. Best option is to have a cast elbow welded to the compressor housing like this:
images.jpg

I ended up using a spacer between the turbo and manifold to add clearance but it sounds like that may not work with your holset...
 

1986.5supra_kid

Rice? No its Corn (E85)
Authorized Seller
Joined
May 7, 2010
Messages
976
Likes
1
Location
Anderson, South Carolina, United States
#61
I have been doing other things instead of supra and its been things like turkey day and vw exploding wheel bearing then the weather being a cold bitch. ugh maybe this weekend ill get to do the intake and compressor housing. they need cutt and welded then some sensors installed....
 

1986.5supra_kid

Rice? No its Corn (E85)
Authorized Seller
Joined
May 7, 2010
Messages
976
Likes
1
Location
Anderson, South Carolina, United States
#63
haha well maybe this 6 days off i can get my parts off and get them fabbed up and make some progress.this car moddin if a true effort for the inexperienced like myself.

oh and i might have a new addition to my family of yoter.....1976 celica liftback GT :)
 

1986.5supra_kid

Rice? No its Corn (E85)
Authorized Seller
Joined
May 7, 2010
Messages
976
Likes
1
Location
Anderson, South Carolina, United States
#68
2012-12-15_13-58-58_484.jpg 2012-12-15_13-59-15_713.jpg 2012-12-15_13-59-39_763.jpg 2012-12-15_16-54-10_752.jpg 2012-12-15_16-55-19_765.jpg 2012-12-15_16-55-55_974.jpg

oh and i need a relay for the A/C and condenser fan.i was going to move the fuse block under the fender then was like f that. so i just moved it long was and now i need a smaller battery. any ideas on any of the problems i have found or created?
 

AbsoluteSpeed

Member
Authorized Seller
Joined
Aug 8, 2007
Messages
739
Likes
0
Location
Edmonton AB
#69
PROBLEMS :/ so i cant figure out how to hook up the intercooler kit from driftmotion. and i cannot figure out how to hook up a power steering reservoir or where to place it. i pulled off a reservoir off a sc400
Is this a universal kit? I don't remember driftmotion having intercooler pipes for a 2J MK3.
Also, where is your rad? It looks like that first pipe off the intake mani will interfere with the rad..
 

1986.5supra_kid

Rice? No its Corn (E85)
Authorized Seller
Joined
May 7, 2010
Messages
976
Likes
1
Location
Anderson, South Carolina, United States
#70
koyo rad is im my bedroom where its safe at ill use the stock one for an idea on space. and its a 1jz kit for a single turbo mk3. i was given the impression it would be a easy fit.

im really getting sick of this project. im doing this all in my parents back yard with out any powertools. files,hand saws,bolts,nuts and hand tools only....smh its a real bitch.
 

1986.5supra_kid

Rice? No its Corn (E85)
Authorized Seller
Joined
May 7, 2010
Messages
976
Likes
1
Location
Anderson, South Carolina, United States
#71
koyo rad is im my bedroom where its safe at ill use the stock one for an idea on space. and its a 1jz kit for a single turbo mk3. i was given the impression it would be a easy fit.

im really getting sick of this project. im doing this all in my parents back yard with out any powertools. files,hand saws,bolts,nuts and hand tools only....smh its a real bitch.
 

p5150

ASE and FAA A&P Certified
Authorized Seller
Contributor
Joined
Mar 31, 2005
Messages
1,173
Likes
0
Location
Lancaster, CA
#73
Thats a big job buddy... looks like you dont have a good shop to do it in either. I mounted my PS reservoir next to the battery. I think its a Nissan part but its been a few years. Welded a custom bracket for it too....


Sent from my DROID X2 using Tapatalk 2
 

rokit1man

Member
Authorized Seller
Joined
Jan 27, 2011
Messages
105
Likes
0
Location
Kansas
#74
koyo rad is im my bedroom where its safe at ill use the stock one for an idea on space. and its a 1jz kit for a single turbo mk3. i was given the impression it would be a easy fit.

im really getting sick of this project. im doing this all in my parents back yard with out any powertools. files,hand saws,bolts,nuts and hand tools only....smh its a real bitch.
I admire the hard work your doing with limited space and tools. Its a motivator for me to see someone complete something they started. ;-)
 

1986.5supra_kid

Rice? No its Corn (E85)
Authorized Seller
Joined
May 7, 2010
Messages
976
Likes
1
Location
Anderson, South Carolina, United States
#75
I appreciate it guys. But i may have to put the stock parts back on until summer. I need a riser for the turbo andfnd the oil line fittings for the turbo and find a better fitting ps resivor.
The cold weather isnt helping me or the project.
 

1986.5supra_kid

Rice? No its Corn (E85)
Authorized Seller
Joined
May 7, 2010
Messages
976
Likes
1
Location
Anderson, South Carolina, United States
#76
I appreciate it guys. But i may have to put the stock parts back on until summer. I need a riser for the turbo andfnd the oil line fittings for the turbo and find a better fitting ps resivor.
The cold weather isnt helping me or the project.