Search results

  1. A70nut

    CKRSCCA Points event 4

    If any local Kentucky people are looking for something to do on June 2nd. There is going to be an autocross event held in Lexington. Supras aren't very competitive, but it's still fun for relatively cheap! http://www.ckrscca.org/events/2019/6/2/autocross-points-event-4
  2. A70nut

    Wheel Fitment & Question Thread

    Got this picture real quick today, I'm going to take some nice ones next time it's nice out to really show them off, with the weight and appearance I would highly recommend this wheel.
  3. A70nut

    Wheel Fitment & Question Thread

    I could lower it if I wanted which would only help fitment in my opinion because they would camber in a bit. My only worry would be hitting a massive bump at a big amount of steering angle, I have the Mercedes bbk on the car and they clear the caliper with 5ishmm of clearance between the spokes...
  4. A70nut

    Wheel Fitment & Question Thread

    Work Emotion T5R and Bridgestone Potenza S007A
  5. A70nut

    Wheel Fitment & Question Thread

    you can fit 18x9.5+38 with 275/35R18 under a stock body car with just having to modify the front fender tabs a bit and no adjustment in the rear.
  6. A70nut

    What did you do to your supra today? Pics

    Installed some heat proofing and did some prettying up after a recent small fire caused by rubber hose over the exhaust.
  7. A70nut

    1JZ with 6262 turbo and .58 exhaust housing limit

    It was on a mainline dyno which is an Australian dyno that reads lower, but the 560 is with what it made converted to dynojet numbers since that's what it seems everyone uses.
  8. A70nut

    1JZ with 6262 turbo and .58 exhaust housing limit

    Just thought I'd finish this thread off for anyone who is looking for some answers in the future. Got the car tuned last night, with the .58 housing it made 560whp and around 390ft/lbs on 25 pounds on 93 with the torque curve being pretty linear once boost came on. So the .58 housing in t4 can...
  9. A70nut

    Kentucky track day March 2019

    Sounds good, would love to see more supras out and about, especially ripping around a road course!
  10. A70nut

    1JZ with 6262 turbo and .58 exhaust housing limit

    Yeah I have a .70 that I took off to put this on so I'll go back to that if this doesn't keep me happy, but I'd rather give up a little power up top for a bit of area under the curve down low.
  11. A70nut

    1JZ with 6262 turbo and .58 exhaust housing limit

    This is the reason I want to keep a small rear housing, I start making boost low, but because of the cams shifting the power band, power still doesn't come on hard until just over 4,000 rpms(currently untuned onstock ecu though).
  12. A70nut

    1JZGTE Haltech ECU install and setup

    Did you run the haltech 2jz basemap? Also about to convert to an elite 2000 once I put the car up for the winter and was wondering what you guys used for the basemap.
  13. A70nut

    1JZ with 6262 turbo and .58 exhaust housing limit

    Yeah, I'm sure it'll hit hard, but I plan on roadcoursing and autocrossing the car this upcoming season and I want the response to be as good as I can get it without a quickspool valve or a smaller turbo. I love the response around town too, positive boost by 2500rpm makes it a bit better to...
  14. A70nut

    Kentucky track day March 2019

    NCM motorsports park is going to be hosting a 2 day track day event at the bowling green Corvette test track road course on March 16th and the 17th 2019. This is a chance for hours of seat time on a road course for a relatively fair price compared to the little seat time you get with an...
  15. A70nut

    1JZ with 6262 turbo and .58 exhaust housing limit

    Ok, I think I'll just see what it does with the .58 housing and change to the .7 next winter if I feel I need more, thanks!
  16. A70nut

    1JZ with 6262 turbo and .58 exhaust housing limit

    Ah. Ok, I'm just a bit concerned because I haven't seemed to see any dyno sheets of anyone with a .58 hot side and I dont know what kind of power it will be killing up top. I'd love to see some 500+whp dyno sheets with that exhaust side just so I know it can be done.
  17. A70nut

    1JZ with 6262 turbo and .58 exhaust housing limit

    Alright, thanks! I think I'll switch to the .70 housing I have sitting around then just so I know I have the headroom.
  18. A70nut

    1JZ with 6262 turbo and .58 exhaust housing limit

    I have used the search function to no avail, so now I have come to making a post. The car is a 1jz non vvti with 272 cams and a 6262 turbo with a .58 exhaust housing currently. I'm going standalone in the spring and was wondering if that exhaust housing is going to limit me while trying to make...
  19. A70nut

    Wheel Fitment & Question Thread

    This shot is the only I can get to upload, the car isn't super low in the front and it doesn't rub unless I'm moving at a fast pace and hit a huge bump.